Did you ever want to give temporary access to your house to a visitor or a service person? If you have a keyless entry keypad on the outside of your garage, chances are it can be programmed to activate a four digit PIN for a programmed number of hours or number of accesses, after which it will expire and the PIN will no longer open the door.
To set a temporary PIN:
1. Press the four buttons for your personal entry PIN, and then press and hold the * button. The opener light will blink three times. Release the button.
2. Press the temporary four-digit PIN you have chosen, then press Enter. The opener light will blink four times.
3. To set the number of hours this temporary PIN will work, press the number of hours (up to 255 hours), then press the * button.
OR
To set the number of times this temporary PIN will work, press the number of times (up to 255 times), then press the # button.
The opener light will blink once when the temporary PIN has been learned.
Test by pressing the four buttons for the temporary PIN, then press Enter. The door should open. If you have set the temporary PIN for a certain number of openings, this test will use up one opening. To clear the temporary PIN, repeat steps 1-3, setting the number of hours or times to 0 in step 3.
If you have suggestions for future tips or have questions about maintenance around your home, submit them to ask.the.woodchucks@gmail.com.
